Published by
May 2024, Volume 11 Issue 2
Developing Materials and Structures for Sustainable Engineering
Table of Contents
-
1.1 CARBON FOOTPRINT REDUCTION USING GEOPOLYMER CONCRETE AMIN AKHNOUKH, MONOWER SADIQUE -
1.2 CONCEPTS FOR TIMBER-SPECIFIC MEP INSTALLATIONS AND SEALINGS IN BATHROOMS OF MULTI-STORY RESIDENTIAL BUILDINGS PETRA FORTMÜLLER, GREGOR SILLY, DOMINIK MATZLER, ALEXANDRA THIEL, GERHARD SCHICKHOFER, MICHAEL MONSBERGER -
1.3 EXPLORING COMPOSITE LAMINATED BAMBOO LUMBER TO SUBSTITUTE DIMENSIONAL LUMBER SUPREEDEE RITTIRONK -
1.4 MECHANICAL PROPERTIES OF LAMINATED BAMBOO LUMBER MADE OF TROPICAL SPECIES SUPREEDEE RITTIRONK -
1.5 IDENTIFYING CHALLENGES AFFECTING SUSTAINABLE CONSTRUCTION IN THE CONSTRUCTION INDUSTRY GÜLDEN GÜMÜSBURUN AYALP, YUSUF BERKAY METINAL -
1.6 INNOVATIVE TECHNOLOGICAL SOLUTIONS FOR REMOVAL OF PHARMACEUTICAL CONTAMINANTS FROM WATER SOURCES IRINA MEGHEA, MIHAI LESNIC, ANA-MARIA MANEA-SAGHIN -
1.7 DESIGN SOLUTIONS FOR REHABILITATION OF A WATER TREATMENT PLANT IRINA MEGHEA, MIHAI LESNIC, ANA-MARIA MANEA-SAGHIN -
1.8 EFFECT OF DUNE SAND AND FLY ASH ON THE MICROSTRUCTURE OF FIBER REINFORCED CONCRETE HUSSEIN HAMADA, FARID ABED -
1.9 RECYCLING METHODS FOR STEEL FIBER REINFORCED CONCRETE STEFAN KAESEBERG, ELISABETH SCHMIDT, KLAUS HOLSCHEMACHER -
1.10 OPTIMIZING FINE AGGREGATE AND CEMENT REPLACEMENT WITH STONE DUST: IMPACT ON CONCRETE COMPRESSIVE STRENGTH NASER KABASHI, ENES KRASNIQI, MILOT MUHAXHERI, VALON VESELI, YLLI MURATI -
1.11 DEFORMATION OF END CROSSBEAMS OF STEEL BRIDGES RELATED TO SUSTAINABILITY OF BRIDGE JOINTS PHILIPPE VAN BOGAERT, HANS DE BACKER -
1.12 EXPLORING THE SUSTAINABILITY OF CONCRETE BRIDGES AHMAD DAWAYMEH, SANA AMIR, HAZEM GOUDA -
1.13 THE STRUCTURAL BEHAVIOR OF RECYCLED AGGREGATE CONCRETE WALLS UNDER FIRE EXPOSURE: A FINITE ELEMENT ANALYSIS MAHA ASSAD, RAMI HAWILEH, GHADA KARAKI, JAMAL ABDALLA -
1.14 EXPERIMENTAL STUDY ON THE WOODEN MEMBER CONNECTION METHOD IN SEISMIC PANEL DAMPERS FOR STEEL STRUCTURES YO KURATOMI, TATSUO INADA -
1.15 NUMERICAL MODELLING OF STRUCTURAL BAMBOO UNDER COMPRESSION ZAINAB RASHID, GOKULNATH CHINNASAMY -
1.16 COMPREHENSIVE ANALYSIS OF ENERGY DISSIPATION IN SOIL-EMBEDDED PILES: AN ANALYTICAL APPROACH RISHAB DAS, ARNAB BANERJEE, BAPPADITYA MANNA
-
2.1 STRAIN MEASUREMENT AND ADHESIVE SELECTION FOR STRAIN GAUGES ON CARBON ROVING IN TEXTILE-REINFORCED CONCRETE STRUCTURES WLADISLAW POLIENKO, BIRUK HAILU TEKLE, KLAUS HOLSCHEMACHER -
2.2 FLOATING DOCK ANALYSIS SUBJECT TO DYNAMIC WAVE LOADS USING COMPUTATIONAL FLUID DYNAMICS HONGGAO LUO, XIONGKAI LI, ZIHAO NI, JUN JI, QIAN WANG -
2.3 COMPARISON OF SOIL DEFORMATION PARAMETERS DETERMINED BY OEDOMETER AND TRIAXIAL TESTS NERINGA DIRGĖLIENĖ, ŠARŪNAS SKUODIS, MINDAUGAS ZAKARKA, MICHAIL FIODOROV -
2.4 GYROID CELL USAGE IN TOPOLOGY OPTIMIZATION OF LOAD-CARRYING PARTS MARKO KEGL, BOŠTJAN HARL, DEJAN DINEVSKI, JOŽEF PREDAN -
2.5 INVESTIGATION OF STEEL ANGLE AND PLATE CONFINEMENT ON CONCRETE UNDER AXIAL LOAD USING DIFFERENT AGGREGATE MD. MONIRUL ISLAM, MOHAMMAD OSMAN GHONE, S. M. MUSHFEQUR RAHMAN, ALI IMAM EMU, EMAM HASAN EMON, RIFAT SULTANA MAHIN, MD. RAKIB HOSEN, AISHA AKTER SORNALI, MD. ASHIK SHIKDAR -
2.6 FINITE SHEAR STRAIN BASED ON IMAGE ANALYSIS FOR RECTANGULAR SECTION SHAFT WITH LARGE ASPECT RATIO YASUYUKI KATO -
2.7 ALTERNATIVE LOAD PATH AVOIDING BRIDGE COLLAPSE AFTER DEMOLITION OF A PIER BY COLLISION PHILIPPE VAN BOGAERT, HANS DE BACKER -
2.8 FIRE RESPONSE OF CIRCULAR RC COLUMNS STRENGTHENED WITH PBO FRCM SALEM KHALAF, FARID ABED, AHMED EL REFAI -
2.9 FATIGUE BOND LIFE OF REINFORCED CONCRETE BEAMS WITH LOW REINFORCEMENT CORROSION HALEEMA THAJUDDEEN, MADHU M. KARTHIK -
2.10 A SIMPLE APPROACH FOR PREDICTING CURVATURE IN CONCRETE MEMBERS REINFORCED WITH STEEL FIBERS AND BARS GINTARIS KAKLAUSKAS, ALEKSANDR SOKOLOV -
2.11 STRENGTH DESIGN OF REINFORCED CONCRETE SECTIONS BASED ON A NUMERICAL OPTIMIZATION METHOD WEI GAO, ZHU YI, HAOSEN GUO, JUN JI, QIAN WANG -
2.12 DATA-DRIVEN ASSESSMENT OF SHEAR STRENGTH OF SINUSOIDAL CORRUGATED STEEL WEBS ROUBA ALZOUBI, SAMER A. BARAKAT, MUHAMMAD TALHA JUNAID -
2.13 INNOVATIVE TORSIONAL STRENGTHENING OF RC T-BEAMS USING NSM FRP ROPES ADAMANTIS G. ZAPRIS, VIOLETTA K. KYTINOU, IOANNIS P. XYNOPOYLOS, VIKTOR GRIBNIAK, CONSTANTIN E. CHALIORIS -
2.14 INVESTIGATING FIRE-INDUCED DAMAGE ON FIBER-REINFORCED CONCRETE SAMPLES USING NONDESTRUCTIVE EVALUATION METHODS ANASTASIOS MPALASKAS, VIOLETTA K. KYTINOU, ADAMANTIS G. ZAPRIS, THEODORE MATIKAS -
2.15 DYNAMIC RESPONSE OF ELASTICALLY-SUPPORTED BRIDGES UNDER OPPOSITE MOVING HIGH-SPEED LOADS Susmita Panda, Arnab Banerjee, Bappaditya Manna
-
3.1 IMPACT OF ALUMINOSILICATE WASTES ON THE HYDRATION, PHYSICAL AND MECHANICAL PROPERTIES OF CEMENT PASTE VALENTIN ANTONOVIČ, DONATAS SIKARSKAS, RENATA BORIS, JURGITA MALAIŠKIENĖ, RIMVYDAS STONYS -
3.2 IMPACT OF FREEZE-THAW CYCLES ON BACTERIAL VIABILITY IN CONCRETE RONALDAS JAKUBOVSKIS, AUGUSTA IVAŠKĖ, SIMONA GUOBUŽAITĖ, JURGITA MALAIŠKIENĖ -
3.3 DEVELOPMENT OF A SELF-LEVELING FLY ASH-SLAG GEOPOLYMER MORTAR JOUD HWALLA, EVEN TEKLE, HILAL EL-HASSAN, JOSEPH ASSAAD, TAMER EL-MAADDAWY -
3.4 EVALUATION OF EARLY-AGE COMPRESSIVE STRENGTH OF GEOPOLYMER CONCRETE MASONRY UNITS ELEN ABUOWDA, HILAL EL-HASSAN, TAMER EL-MAADDAWY -
3.5 MECHANICAL AND HYDRAULIC PERFORMANCE OF PERVIOUS RECYCLED AGGREGATE GEOPOLYMER CONCRETE FAIZ HABIB ANWAR, HILAL EL-HASSAN, MOHAMED HAMOUDA, ABDULKADER EL-MIR, KIM HUNG MO -
3.6 PACKING ORDER THEORY FOR ULTRA-HIGH PERFORMANCE CONCRETE MIX DESIGN: A CRITICAL REVIEW AMIN AKHNOUKH, MOHAMED DIAB -
3.7 OVERVIEW OF STUDIES ON EXTERNAL CONFINEMENT OF R/C COLUMNS USING UNIAXIAL GEOGRID RUBA H. BASHIR, BILAL S. HAMAD -
3.8 EXPLORING MICROGRIDS AS A PROMISING SOLUTION FOR EQUITABLE ELECTRICITY ACCESSIBILITY NIOUSHA TALEBPOUR, MOHAMMAD ILBEIGI -
3.9 EXAMINING THE APPLICABILITY OF ALKALI ACTIVATED BINDERS (AABS) AS A LANDFILL LINER AND COVER ANWAAR ALOMOUR, MOHAMED G. ARAB, MOHAMED ABDALLAH, EMRAN ALOTAIBI -
3.10 LOAD-BEARING BEHAVIOR OF SHORT-FIBER-REINFORCED TEXTILE CONCRETE FOR A WRAPPING PROCESS FABIAN KUFNER, RUCKER-GRAMM, MICHAEL HORSTMANN -
3.11 RHEOLOGICAL CHARACTERIZATION OF TRANSPARENT ASPHALT MODIFIED WITH COLORING PIGMENTS ALYA ALSUWAIDI, WALEED ZEIADA, AYAT ASHOUR, SAEED HAMDAN, HELAL EZZAT, GHAZI G.AL-KHATEEB -
3.12 MECHANICAL PROPERTIES OF DIFFERENT TYPES OF FIBER-REINFORCED CONCRETE: BENEFITS AND LIMITATIONS ABDELAZIZ SALIM, ABDALLA SALIM -
3.13 LOAD-BEARING CAPACITY, BOND BEHAVIOR, ENVIRONMENTAL IMPACT AND APPLICATION OF BFRP-REINFORCEMENT IN CONCRETE KAY LENGERT, STEPHAN GÖRTZ -
3.14 WRAPPING PROCESS FOR BUILDING COMPONENTS MADE OF GLASSFIBER- AND TEXTILE-REINFORCED CONCRETE FABIAN KUFNER, PETRA RUCKER-GRAMM, MICHAEL HORSTMANN -
3.15 EVALUATING THE PLA AGING EFFECTS ON THE MECHANICAL PERFORMANCE OF 3D-PRINTED COMPONENTS ARVYDAS RIMKUS, REMIGIJUS ŠALNA, VIKTOR GRIBNIAK
-
4.1 DIGITAL TWIN COLLABORATION: A COMMON TECHNICAL STRUCTURE FOR THE AUTOMOTIVE AND THE BUILDING INDUSTRY LUISA BRAUN, JENNIFER MOCK, LOUISA JUNG, PETER BOETTCHER, FRANK SCHOLZEN -
4.2 UNDERLYING AND RANKING FACTORS CONTRIBUTING TO CONSTRUCTION WASTE GENERATION IN THE CONSTRUCTION INDUSTRY YUSUF BERKAY METINAL, GULDEN GUMUSBURUN AYALP -
4.3 AGILE TEAM COMMUNICATION IN CONSTRUCTION PROJECTS: A SURVEY-BASED APPROACH HANDAN KUNKCU, KERIM KOC, ASLI PELIN GURGUN -
4.4 FACTORS AFFECTING COMPETITIVENESS IN THE CONSTRUCTION INDUSTRY: A SYSTEMATIC LITERATURE REVIEW ANAS AL-KAYED, FUNMILAYO EBUN ROTIMI, MAHESH PURUSHOTHAMAN, ALI GHAFFARIAN HOSEINI -
4.5 DESIGN FOR MANUFACTURING AND ASSEMBLY (DFMA) – WHAT AFFECTS ITS ADOPTION IN THE CONSTRUCTION PROJECTS? LIZ L. Z. SHEN, PETER S. P. WONG, ERIC TOO -
4.6 IMPLEMENTING VIRTUAL REALITY TO FOSTER CONSTRUCTION DEFECTS CHECKING AND REPORTING PETER S. P. WONG, WILL NICHOLLS -
4.7 CONSTRUCTION SITE INFORMATION MODELLING APPLIED TO INFRABIM MARCO LORENZO TRANI, FEDERICA MADASCHI, GUIDO PREDIERI -
4.8 A REVIEW OF RESEARCH IN CONSTRUCTION INCENTIVIZATION SAI ON CHEUNG, QIUWEN MA, FONG CHUNG LEE, STEVEN HUMPHREY -
4.9 USE OF CONSTRUCTION INCENTIVE: SECTORAL DIFFERENCES QIUWEN MA, SAI ON CHEUNG, STEVEN HUMPHREY, FONG CHUNG LEE -
4.10 EMPOWERING THE NEXT GENERATION: TRANSFORMATIVE IMPACT OF FACULTY DEVELOPMENT PROGRAMS IN CONSTRUCTION MANAGEMENT AND ENGINEERING MOHAMMADHOSSEIN HEYDARI, ALIREZA SHOJAEI, SAEED ROKOOEI -
4.11 ELEVATING CONSTRUCTION GRADUATE STUDENTS' PEDAGOGICAL PROWESS THROUGH FACULTY DEVELOPMENT INITIATIVES SAEED ROKOOEI, ALIREZA SHOJAEI, EHSAN TAVAKKOL -
4.12 COURT EXPERTS’ CONTRIBUTION TO AN EFFICIENT DISPUTE RESOLUTION PAOLA PROVENZANO, ULRIKE QUAPP -
4.13 CIVIL LITIGATION AND DISPUTE RESOLUTION DURING URBAN TUNNEL CONSTRUCTION CAUSED BY PROPRIETY DAMAGE PAOLA PROVENZANO, GIUSEPPE IDDAS -
4.14 DECISION SUPPORT MODEL FOR SELECTING PROJECT DELIVERY METHODS IN SUSTAINABLE CONSTRUCTION PROJECTS SALMA AHMED, SAMEH EL-SAYEGH -
4.15 A LITERATURE REVIEW ON RISK FACTORS ON INTERNATIONAL CONSTRUCTION PROJECTS MUHAMMET AKYOL, GUL POLAT, ASLI PELIN GURGUN
-
5.1 THE CARBON-REINFORCED CONCRETE BUILDING – CUBE | BOX MANUFACTURING AND ASSEMBLING MICHAEL FRENZEL, MATTHIAS TIETZE, ALEXANDER KAHNT -
5.2 MARITIME DEPLOYMENT PLANNING AND EXECUTION FOR FIELD TESTING OF OCEAN CURRENT POWER GENERATOR CHUAN-TSUNG LEE, YANG-YIH CHEN, CHUNG-PAN LEE, SHIAHN-WERN SHYUE, TSUNG-LUNG LIU-HUANG -
5.3 LESSONS LEARNT FROM SOIL IMPROVEMENT CASE STUDIES SYED FAIZ AHMAD -
5.4 INDUSTRY PERSPECTIVE ON THE TRANSITION TO ECO-FRIENDLY SINGLE-FAMILY HOMES PAYAM BAKHSHI, AFSHIN POURMOKHTARIAN, JOHN CRIBBS -
5.5 AN EXPLORATION OF PASIFIKA MULTIGENERATIONAL SOCIAL HOUSING IAN FISTONICH, LYDIA KIROFF -
5.6 UNDERGROUND POWER LINES: ANALYSIS OF ENVIRONMENTAL, VISUAL, ECONOMIC, AND SAFETY BENEFITS KEVIN CORIZZI, AMARJIT SINGH -
5.7 A MOBILE-BASED LOCALIZATION SYSTEM FOR INFRASTRUCTURE-INDEPENDENT EMERGENCY COMMUNICATION HOJAT BEHROOZ, MOHAMMAD ILBEIGI -
5.8 FLASH FLOODS: RISK ASSESSMENT AND MITIGATION SOUGHAH ALSAMAHI, HAZEM GOUDA, SANA AMIR, ASDAM ALGHEZAWI -
5.9 IMPLEMENTATION OF THE PRISM SURVEY FORM TO CREATE SEISMIC RISK MAPS GEORGIOS XEKALAKIS, STEFANIA APOSTOLAKI, DEIVIDAS MARTINAVICIUS, PARIS FOKAIDES, PETROS CHRISTOU -
5.10 PERFORMANCE COMPARISON OF DERIVATIVE-FREE OPTIMIZATION METHODS MOHAMMAD S. MIAH, WERNER LIENHART -
5.11 COMPARATIVE EVALUATION OF LEED CERTIFIED HOSPITALS WITH “YES-TR” IN THE SCOPE OF "GREEN CERTIFICATION" RECEP AHMED BUYUKCINAR, RUVEYDA KOMURLU -
5.12 COMPARATIVE EVALUATION OF “LEED” CERTIFIED SCHOOLS WITH “YES-TR” IN THE CONTEXT OF “GREEN CERTIFICATION” IZEL AKYEL, RUVEYDA KOMURLU -
5.13 EUROPEAN CLIMATE PROTECTION STRATEGY UNDER CONSIDERATION OF BUILT HERITAGE PRESERVATION ULRIKE QUAPP, KLAUS HOLSCHEMACHER -
5.14 USING MACHINE LEARNING TO PREDICT THE MECHANICAL PROPERTIES OF PET FIBER-REINFORCED CONCRETE ABDELAZIZ SALIM, M. TALHA JUNAID, SAMER BARAKAT -
5.15 Interaction between Geogrid Reinforcement and Stone Aggregates mixed with Tire Derived Aggregates UPENDRA MODAVALASA, RAMANTHAN AYOTHIRAMAN